H3C S6812 Series Command Reference Manual page 1703

Predefined user roles
network-admin
Parameters
data: Specifies the unit for data flows.
byte: Specifies the unit as byte.
giga-byte: Specifies the unit as gigabyte.
kilo-byte: Specifies the unit as kilobyte.
mega-byte: Specifies the unit as megabyte.
packet: Specifies the unit for data packets.
giga-packet: Specifies the unit as giga-packet.
kilo-packet: Specifies the unit as kilo-packet.
mega-packet: Specifies the unit as mega-packet.
one-packet: Specifies the unit as one-packet.
Usage guidelines
The data flow and packet measurement units for traffic statistics must be the same as configured on
the RADIUS accounting servers. Otherwise, accounting results might be incorrect.
Examples
# In RADIUS scheme radius1, set the data flow and packet measurement units for traffic statistics to
kilobyte and kilo-packet, respectively.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet
Related commands
display radius scheme
display radius scheme
Use display radius scheme to display RADIUS scheme configuration.
Syntax
display radius scheme [ radius-scheme-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32
characters. If you do not specify a RADIUS scheme, this command displays the configuration of all
RADIUS schemes.
Examples
# Display the configuration of all RADIUS schemes.
<Sysname> display radius scheme
62