H3C S6812 Series Command Reference Manual page 1601

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos wrr byte-count
Related commands
display qos queue wrr interface
qos wrr { byte-count | weight }
Use qos wrr { byte-count | weight } to configure the WRR queuing parameters for a queue on an
interface.
Use undo qos wrr to delete the WRR queuing parameters of a queue on an interface.
Syntax
qos wrr queue-id group 1 { byte-count | weight } schedule-value
undo qos wrr queue-id
Default
All queues on a WRR-enabled interface are in WRR group 1, and queues 0 through 7 have a weight
of 1, 2, 3, 4, 5, 9, 13, and 15, respectively.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
queue-id: Specifies a queue by its ID. The value range for this argument is 0 to 7 or keywords in
Table 20.
Table 20 The number-keyword map for the queue-id argument
Number
0
1
2
3
4
5
6
7
group 1: Specifies WRR group 1. Only WRR group 1 is supported in the current software version.
byte-count: Allocates bandwidth to queues based on byte count.
weight: Allocates bandwidth to queues based on packet count.
schedule-value: Specifies a scheduling weight in the range of 1 to 15.
Keyword
be
af1
af2
af3
af4
ef
cs6
cs7
50