H3C S6812 Series Command Reference Manual page 1717

[Sysname] radius nas-ip 129.10.10.1
Related commands
nas-ip (RADIUS scheme view)
radius scheme
Use radius scheme to create a RADIUS scheme and enter its view, or enter the view of an existing
RADIUS scheme.
Use undo radius scheme to delete a RADIUS scheme.
Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
Default
No RADIUS schemes exist.
Views
System view
Predefined user roles
network-admin
Parameters
radius-scheme-name: Specifies the RADIUS scheme name, a case-insensitive string of 1 to 32
characters.
Usage guidelines
A RADIUS scheme can be used by more than one ISP domain at the same time.
The device supports a maximum of 16 RADIUS schemes.
Examples
# Create a RADIUS scheme named radius1 and enter RADIUS scheme view.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1]
Related commands
display radius scheme
radius session-control client
Use radius session-control client to specify a RADIUS session-control client.
Use undo radius session-control client to remove the specified RADIUS session-control clients.
Syntax
radius session-control client { ip ipv4-address | ipv6 ipv6-address } [ key { cipher | simple }
string ]
undo radius session-control client { all | { ip ipv4-address | ipv6 ipv6-address } }
Default
No RADIUS session-control clients are specified.
76