H3C S6812 Series Command Reference Manual page 1910

User profile commands
display user-profile
Use display user-profile to display configuration and online user information for user profiles.
Syntax
display user-profile [ name profile-name ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name profile-name: Specifies a user profile by its name, a case-sensitive string of 1 to 31 characters.
Valid characters include English letters, digits, and underscores (_). The name must start with an
English letter and must be unique. If you do not specify this option, the command displays
configuration and online user information for all user profiles.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays user profile configuration and online user information for all member
devices.
Examples
# Display configuration and online user information for user profile aaa.
<Sysname> display user-profile name aaa
User-Profile: aaa
Inbound:
CIR 64 (kbps), CBS 512 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)
Policy: p1
Outbound:
CIR 64 (kbps), CBS 512 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)
User user_1:
Authentication type: 802.1X
Network attributes:
Interface
MAC address
Failed action list:
Inbound: Policy p1
Inbound: CIR 64 (kbps), CBS 2048 (Bytes), EBS 0 (Bytes), PIR 888 (kbps)
Table 1 Command output
Field
User-Profile
Inbound
: Ten-GigabitEthernet1/0/1
: 0000-1111-2222
Description
User profile name.
Policy applied to incoming traffic.
1