H3C S6812 Series Command Reference Manual page 1719

undo radius session-control enable
Default
The RADIUS session-control feature is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
An H3C IMC RADIUS server uses session-control packets to deliver dynamic authorization change
requests or disconnection requests to the device. The session-control feature enables the device to
receive the RADIUS session-control packets on UDP port 1812.
This feature must work with H3C IMC servers.
Examples
# Enable the RADIUS session-control feature.
<Sysname> system-view
[Sysname] radius session-control enable
radius-server test-profile
Use radius-server test-profile to configure a test profile for detecting the RADIUS server status.
Use undo radius-server test-profile to delete a RADIUS test profile.
Syntax
radius-server test-profile profile-name username name [ interval interval ]
undo radius-server test-profile profile-name
Default
No RADIUS test profiles exist.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name: Specifies the name of the test profile, which is a case-sensitive string of 1 to 31
characters.
username name: Specifies the username in the detection packets. The name argument is a
case-sensitive string of 1 to 253 characters.
interval interval: Specifies the interval for sending a detection packet, in minutes. The value range
for the interval argument is 1 to 3600, and the default value is 60.
Usage guidelines
You can execute this command multiple times to configure multiple test profiles.
If you specify a nonexistent test profile for a RADIUS server, the device does not detect the status of
the server until you create the test profile on the device.
78