H3C S6812 Series Command Reference Manual page 1715

Default
The DSCP priority of RADIUS packets is 0.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6: Specifies the IPv6 RADIUS packets. If you do not specify this keyword, the command sets the
DSCP priority for the IPv4 RADIUS packets.
dscp-value: Specifies the DSCP priority of RADIUS packets, in the range of 0 to 63. A larger value
represents a higher priority.
Usage guidelines
Use this command to set the DSCP priority in the ToS field of RADIUS packets for changing their
transmission priority.
Examples
# Set the DSCP priority of IPv4 RADIUS packets to 10.
<Sysname> system-view
[Sysname] radius dscp 10
radius dynamic-author server
Use radius dynamic-author server to enable the RADIUS DAE server feature and enter RADIUS
DAE server view.
Use undo radius dynamic-author server to disable the RADIUS DAE server feature.
Syntax
radius dynamic-author server
undo radius dynamic-author server
Default
The RADIUS DAE server feature is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
After you enable the RADIUS DAE server feature, the device listens to the RADIUS DAE server port
to receive DAE packets from specified DAE clients.
Examples
# Enable the RADIUS DAE server feature and enter RADIUS DAE server view.
<Sysname> system-view
[Sysname] radius dynamic-author server
[Sysname-radius-da-server]
74