H3C S6812 Series Command Reference Manual page 1598

7
Table 17 Command output
Field
Interface
Output queue
Group
Byte-count
SP commands
display qos queue sp interface
Use display qos queue sp interface to display the SP queuing configuration of an interface.
Syntax
display qos queue sp interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the SP queuing configuration of all interfaces.
Examples
# Display the SP queuing configuration of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos queue sp interface ten-gigabitethernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Output queue: Strict Priority queuing
Table 18 Command output
Field
Interface
Output queue
qos sp
Use qos sp to enable SP queuing on an interface.
Use undo qos sp to restore the default.
cs7 1
Description
Interface name, including the interface type and interface number.
Type of the current output queue.
Number of the group that holds the queue. By default, all queues are in
group 1.
Byte-count scheduling weight of the queue.
Description
Interface type and interface number.
Type of the current output queue.
15
47