H3C S6812 Series Command Reference Manual page 1714

code attribute-code: Specifies the ID of the RADIUS attribute in the attribute set. The value range for
the attribute-code argument is 1 to 255.
type: Specifies a data type for the attribute content.
binary: Binary type.
date: Date type.
integer: Integer type.
interface-id: Interface ID type.
ip: IPv4 address type.
ipv6: IPv6 address type.
ipv6-prefix: IPv6 address prefix type.
octets: Octet type.
string: String type.
Usage guidelines
To support the proprietary RADIUS attributes of other vendors, perform the following tasks:
1. Use this command to define the attributes as extended RADIUS attributes.
2. Use the attribute convert command to map the extended RADIUS attributes to attributes
supported by the system.
3. Use the attribute translate command to enable the RADIUS attribute translation feature for the
mappings to take effect.
To cooperate with RADIUS servers of a third-party vendor, map attributes that cannot be identified by
the server to server-supported attributes.
Two RADIUS attributes cannot have the same combination of attribute name, vendor ID, and
attribute ID.
If you do not specify a RADIUS attribute name, the undo radius attribute extended command
deletes all user-defined extended RADIUS attributes.
Examples
# Define a string-type extended RADIUS attribute with the name Owner-Password, vendor ID 122,
and attribute ID 80.
<Sysname> system-view
[Sysname] radius attribute extended Owner-Password vendor 122 code 80 type string
Related commands
attribute convert (RADIUS DAE server view)
attribute convert (RADIUS scheme view)
attribute reject (RADIUS DAE server view)
attribute reject (RADIUS scheme view)
radius dscp
Use radius dscp to change the DSCP priority of RADIUS packets.
Use undo radius dscp to restore the default.
Syntax
radius [ ipv6 ] dscp dscp-value
undo radius [ ipv6 ] dscp
73