H3C S6812 Series Command Reference Manual page 1610

af1
af2
af3
af4
ef
cs6
cs7
Table 23 Command output
Field
Queue management profile
Type
Group
Schedule unit
Schedule value
Min bandwidth
Max bandwidth
display qos qmprofile interface
Use display qos qmprofile interface to display the queue scheduling profile applied to an interface.
Syntax
display qos qmprofile interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the queue scheduling profiles applied to all interfaces.
Examples
# Display the queue scheduling profile applied to Ten-GigabitEthernet 1/0/1.
<Sysname> display qos qmprofile interface ten-gigabitethernet 1/0/1
WRR 1 weight
WRR 1 weight
WRR 1 weight
WRR 1 weight
WRR 1 weight
WRR 1 weight
WRR 1 weight
Description
Queue scheduling profile name.
Queue scheduling type:
•
•
•
Priority group to which the queue belongs. The value can only be 1.
N/A indicates this field is ignored.
Scheduling unit: weight or byte-count.
N/A indicates that this field is ignored.
This field indicates:
•
•
N/A indicates that this field is ignored.
Minimum guaranteed bandwidth for the queue. N/A indicates that this
field is ignored.
Maximum allowed bandwidth for the queue. N/A indicates that this field
is ignored.
2 N/A
3 N/A
4 N/A
5 N/A
9 N/A
13 N/A
15 N/A
SP.
WRR.
WFQ.
Number of packets for the weight scheduling unit.
Number of bytes for the byte-count scheduling unit.
59
N/A
N/A
N/A
N/A
N/A
N/A
N/A