H3C S6812 Series Command Reference Manual page 1669

Field
domain
Use domain to create an ISP domain and enter its view, or enter the view of an existing ISP domain.
Use undo domain to delete an ISP domain.
Syntax
domain isp-name
undo domain isp-name
Default
A system-defined ISP domain exists. The domain name is system.
Views
System view
Predefined user roles
network-admin
Parameters
isp-name: Specifies the ISP domain name, a case-insensitive string of 1 to 255 characters. The
name must meet the following requirements:
•
The name cannot contain a forward slash (/), backslash (\), vertical bar (|), quotation marks ("),
colon (:), asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), or at sign
(@).
•
The name cannot be d, de, def, defa, defau, defaul, default, i, if, if-, if-u, if-un, if-unk, if-unkn,
if-unkno, if-unknow, or if-unknown.
Usage guidelines
All ISP domains are in active state when they are created.
You can modify settings for the system-defined ISP domain system, but you cannot delete this
domain.
An ISP domain cannot be deleted when it is the default ISP domain. Before you use the undo
domain command, change the domain to a non-default ISP domain by using the undo domain
default enable command.
Use short domain names to ensure that user names containing a domain name do not exceed the
maximum name length required by different types of users.
Examples
# Create an ISP domain named test and enter ISP domain view.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test]
Related commands
display domain
domain default enable
domain if-unknown
Description
concurrently.
28