H3C S6812 Series Command Reference Manual page 1683

display user-group
Use display user-group to display user group configuration.
Syntax
display user-group { all | name group-name }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all user groups.
name group-name: Specifies a user group by its name, a case-insensitive string of 1 to 32
characters.
Examples
# Display the configuration of all user groups.
<Sysname> display user-group all
Total 2 user groups matched.
User group: system
Authorization attributes:
Work directory:
User group: jj
Authorization attributes:
Idle timeout:
Work directory:
ACL number:
VLAN ID:
User profile:
Password control configurations:
Password aging:
Table 3 Command output
Field
Authorization attributes
Idle timeout
Session-timeout
Work directory
ACL number
VLAN ID
User profile
IP pool
flash:
2 minutes
flash:/
2000
2
pp
2 days
Description
Authorization attributes of the user group.
Idle timeout period, in minutes.
Session timeout timer, in minutes.
Directory that FTP, SFTP, or SCP users in the group can access.
Authorization ACL.
Authorized VLAN.
Authorization user profile.
IPv4 address pool authorized to the user group.
42