H3C S6812 Series Command Reference Manual page 1796

MAC authentication commands
display mac-authentication
Use display mac-authentication to display MAC authentication settings and statistics.
Syntax
display mac-authentication [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If the specified
port is not enabled with MAC authentication, this command displays only global MAC authentication
information. If you do not specify a port, this command displays all MAC authentication information
including the global settings, port-specific settings, MAC authentication statistics, and online user
statistics.
Examples
# Display all MAC authentication settings and statistics.
<Sysname> display mac-authentication
Global MAC authentication parameters:
MAC authentication
Username format
Offline detect period
Quiet period
Server timeout
Authentication domain
Online MAC-auth wired users
Silent MAC users:
Ten-GigabitEthernet1/0/1
MAC authentication
Carry User-IP
Authentication domain
Auth-delay timer
Auth-delay period
Re-auth server-unreachable : Logoff
Guest VLAN
: Enabled
: MAC address in lowercase(xxxxxxxxxxxx)
Username : mac
Password : Not configured
: 300 s
: 60 s
: 100 s
: Not configured, use default domain
MAC address VLAN ID
0001-0000-0001 100
is link-up
: 1
From port
XGE1/0/2
: Enabled
: Disabled
: Not configured
: Enabled
: 60 s
: 100
1
Port index
21