H3C S6812 Series Command Reference Manual page 1864

[Sysname-portal-local-websvr-http] quit
# Configure a local portal Web server. Use HTTPS to exchange authentication information with
clients, and specify SSL server policy policy1 for HTTPS.
<Sysname> system-view
[Sysname] portal local-web-server https ssl-server-policy policy1
[Sysname-portal-local-websvr-https] quit
# Change the SSL server policy to policy2.
[Sysname] undo portal local-web-server https
[Sysname] portal local-web-server https ssl-server-policy policy2
[Sysname-portal-local-websvr-https] quit
Related commands
default-logon-page
portal local-web-server
ssl server-policy
portal log enable
Use portal log enable to enable logging for portal user logins and logouts.
Use undo user log enable to disable logging for portal user logins and logouts.
Syntax
portal log enable
undo portal log enable
Default
Portal user login and logout logging is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This feature logs information about portal user login and logout events, including the username, IP
address, user's MAC address, interface name, VLAN, and reason for login failure. For portal log
messages to be sent correctly, you must also configure the information center on the device. For
more information about information center configuration, see Network Management and Monitoring
Configuration Guide.
Examples
# Enable logging for portal user logins and logouts.
<Sysname> system-view
[Sysname] portal user log enable
portal mac-trigger server
Use portal mac-trigger server to create a MAC binding server and enter its view, or enter the view
of an existing MAC binding server.
Use undo portal mac-trigger server to delete the MAC binding server.
50