H3C S6812 Series Command Reference Manual page 1523

IPv4 default action: Deny
Table 2 Command output
Field
Interface
Inbound policy
Outbound policy
IPv4 ACL 2001
IPv6 ACL 2002 (Failed)
Hardware-count
Hardware-count (Failed)
IPv4 default action
IPv6 default action
MAC default action
display packet-filter statistics
Use display packet-filter statistics to display packet filtering statistics.
Syntax
display packet-filter statistics interface interface-type interface-number { inbound | outbound }
[ [ ipv6 | mac ] { acl-number | name acl-name } ] [ brief ]
Views
Any view
Description
Interface to which the ACL applies.
ACL used for filtering incoming traffic.
ACL used for filtering outgoing traffic.
IPv4 basic ACL 2001 has been successfully applied.
The device has failed to apply IPv6 basic ACL 2002.
ACL rule match counting has been successfully enabled.
The device has failed to enable counting ACL rule matches.
Packet filter default action for packets that do not match any IPv4
ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
•
Permit—The default action permit has been successfully
applied for packet filtering.
Packet filter default action for packets that do not match any IPv6
ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
•
Permit—The default action permit has been successfully
applied for packet filtering.
Packet filter default action for packets that do not match any Layer
2 ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
•
Permit—The default action permit has been successfully
applied for packet filtering.
8