H3C S6812 Series Command Reference Manual page 1672

Predefined user roles
network-admin
Parameters
nas-identifier: Specifies a NAS-ID, a case-sensitive string of 1 to 31 characters.
vlan-id: Specifies a VLAN ID in the range of 1 to 4094.
Usage guidelines
You can configure multiple NAS-ID and VLAN bindings in a NAS-ID profile.
A NAS-ID can be bound with more than one VLAN, but a VLAN can be bound with only one NAS-ID.
If you configure multiple bindings for the same VLAN, the most recent configuration takes effect.
Examples
# Bind NAS-ID 222 with VLAN 2 in NAS-ID profile aaa.
<Sysname> system-view
[Sysname] aaa nas-id profile aaa
[Sysname-nas-id-prof-aaa] nas-id 222 bind vlan 2
Related commands
aaa nas-id profile
service-type (ISP domain view)
Use service-type to specify the service type for users in an ISP domain.
Use undo service-type to restore the default.
Syntax
service-type { hsi | stb | voip }
undo service-type
Default
The service type is hsi for users in an ISP domain.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hsi: Specifies the High Speed Internet (HSI) service. This service is applicable to users who access
the network through 802.1X.
stb: Specifies the Set Top Box (STB) service. This service is applicable to users who access the
network through STB.
voip: Specifies the Voice over IP (VoIP) service. This service is applicable to users who access the
network through IP phones.
Usage guidelines
When the HSI service is specified, the multicast feature of the access module is disabled to save
system resources.
When the STB service is specified, the multicast feature of the access module is enabled to improve
the performance of the multicast module.
31