H3C S6812 Series Command Reference Manual page 1693

[Sysname-radius-radius1] accounting-on enable interval 5 send 15
Related commands
display radius scheme
accounting-on extended
Use accounting-on extended to enable the extended accounting-on feature.
Use undo accounting-on extended to disable the extended accounting-on feature.
Syntax
accounting-on extended
undo accounting-on extended
Default
The extended accounting-on feature is disabled.
Views
RADIUS scheme view
Predefined user roles
network-admin
network-operator
Usage guidelines
The extended accounting-on feature enhances the accounting-on feature by applying to a distributed
architecture. For the extended accounting-on feature to take effect, the RADIUS server must run on
IMC and the accounting-on feature must be enabled.
The extended accounting-on feature is applicable to LAN users. The user data is saved to the
member devices through which the users access the IRF fabric.
When the extended accounting-on feature is enabled, the IRF fabric automatically sends an
accounting-on packet to the RADIUS server after a member device reboot (IRF fabric not reboot).
The packet contains the member device identifier. Upon receiving the accounting-on packet, the
RADIUS server logs out all online users who access the IRF fabric through the member device.
The IRF fabric uses the packet retransmission interval and maximum transmission attempts set by
using the accounting-on enable command for this feature.
Execute the save command to ensure that the accounting-on extended command takes effect at
the next member device reboot. For information about the save command, see Fundamentals
Command Reference.
Examples
# Enable the extended accounting-on feature for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on extended
Related commands
accounting-on enable
display radius scheme
52