H3C S6812 Series Command Reference Manual page 1554

Option
dot1p-value&<1-8>
customer-vlan-id vlan-id-list
destination-mac mac-address
dscp dscp-value&<1-8>
ip-precedence
ip-precedence-value&<1-8>
protocol protocol-name
qos-local-id local-id-value
service-dot1p
dot1p-value&<1-8>
service-vlan-id vlan-id-list
source-mac mac-address
Table 3 Available system-defined control plane protocols
Protocol
arp
arp-snooping
dhcp
dhcp-snooping
dhcpv6
dldp
Description
packets.
The dot1p-value&<1-8> argument specifies a space-separated list of up to
eight 802.1p priority values. The value range for the dot1p-value argument
is 0 to 7.
Matches VLAN IDs in inner VLAN tags of double-tagged packets.
The vlan-id-list argument specifies a space-separated list of up to 10
VLAN items. Each item specifies a VLAN or a range of VLANs in the form
of vlan-id1 to vlan-id2. The value for vlan-id2 must be greater than or equal
to the value for vlan-id1. The value range for the vlan-id argument is 1 to
4094.
Matches a destination MAC address.
This option takes effect only on Ethernet interfaces.
Matches DSCP values.
The dscp-value&<1-8> argument specifies a space-separated list of up to
eight DSCP values. The value range for the dscp-value argument is 0 to
63 or keywords shown in
Matches IP precedence values.
The ip-precedence-value&<1-8> argument specifies a space-separated
list of up to eight IP precedence values. The value range for the
ip-precedence-value argument is 0 to 7.
Matches a protocol.
The protocol-name argument can be , ipv6, or ip.
Matches a local QoS ID in the range of 1 to 4095.
Matches 802.1p priority values in outer VLAN tags.
The dot1p-value&<1-8> argument specifies a space-separated list of up to
eight 802.1p priority values. The value range for the dot1p-value argument
is 0 to 7.
Matches VLAN IDs in outer VLAN tags.
The vlan-id-list argument specifies a space-separated list of up to 10
VLAN items. Each item specifies a VLAN or a range of VLANs in the form
of vlan-id1 to vlan-id2. The value for vlan-id2 must be greater than or equal
to the value for vlan-id1. The value range for the vlan-id argument is 1 to
4094.
You can use this option to match single-tagged packets.
Matches a source MAC address.
This option takes effect only on Ethernet interfaces.
Description
ARP packets
ARP snooping packets
DHCP packets
DHCP snooping packets
IPv6 DHCP packets
DLDP packets
3
Table 5.