user-name name-string: Specifies an 802.1X user by its name. The name-string argument
represents the username, a case-sensitive string of 1 to 253 characters. If you do not specify an
802.1X user, this command displays all online 802.1X user information.
Examples
# Display information about all online 802.1X users.
<Sysname> display dot1x connection
Slot ID: 1
User MAC address: 0015-e9a6-7cfe
Access interface: Ten-GigabitEthernet1/0/1
Username: ias
Authentication domain: h3c
IPv4 address: 192.168.1.1
IPv6 address: 2000:0:0:0:1:2345:6789:abcd
Authentication method: CHAP
Initial VLAN: 1
Authorization untagged VLAN: 6
Authorization tagged VLAN list: 1 to 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 29 31 33
Authorization ACL ID: 3001
Authorization user profile: N/A
Termination action: Default
Session timeout period: 2 s
Online from: 2013/03/02
Online duration: 0h 2m 15s
Total 1 connections matched.
Table 2 Command output
Field
User MAC address
Access interface
Authentication domain
IPv4 address
IPv6 address
Authentication method
Initial VLAN
Authorization untagged VLAN
35 37 40 to 100
13:14:15
Description
MAC address of the user.
Interface through which the user access the device.
ISP domain used for 802.1X authentication.
IPv4 address of the user.
If the device does not get the IPv4 address of the user, this field is not
available.
IPv6 address of the user.
If the device does not get the IPv6 address of the user, this field is not
available.
EAP message handling method:
•
CHAP—Performs EAP termination and uses CHAP to
communicate with the RADIUS server.
•
EAP—Relays EAP packets and supports any of the EAP
authentication methods to communicate with the RADIUS server.
•
PAP—Performs EAP termination and uses PAP to communicate
with the RADIUS server.
VLAN to which the user belongs before 802.1X authentication.
Untagged VLAN authorized to the user.
5