H3C S6812 Series Command Reference Manual page 1596

Table 16 Command output
Field
Interface
Direction
CIR
CBS
EBS
Passed
Discarded
Delayed
qos lr
Use qos lr to configure rate limiting on an interface.
Use undo qos lr to delete the rate limit configuration.
Syntax
qos lr { inbound | outbound } cir committed-information-rate [ cbs committed-burst-size ]
undo qos lr { inbound | outbound }
Default
No rate limit is configured on an interface.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
inbound: Limits the rate of incoming packets.
outbound: Limits the rate of outgoing packets.
cir committed-information-rate:
committed-information-rate is 64 to 2621440 for 2.5-GE interfaces and 64 to 10485760 for 10-GE
interfaces. The specified value must be an integral multiple of 64.
cbs committed-burst-size: Specifies the CBS in bytes. The value range for committed-burst-size is
512 to 134217728, in increments of 512. The default value for this argument is the product of 62.5
and the CIR and must be an integral multiple of 512. When the product is not an integral multiple of
512, it is rounded up to the nearest integral multiple of 512 that is greater than the product. A default
value greater than 134217728 is converted to 134217728.
Examples
# Limit the rate of outgoing packets on Ten-GigabitEthernet 1/0/1, with CIR 256 kbps and CBS 51200
bytes.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos lr outbound cir 256 cbs 51200
Description
Interface name, including the interface type and interface number.
Direction to which the rate limit configuration is applied: inbound or outbound.
CIR in kbps.
CBS in bytes.
EBS in bytes.
Number and bytes of packets that have passed.
Number and bytes of dropped packets.
Number and bytes of delayed packets.
Specifies the CIR in kbps.
45
The value range for