H3C S6812 Series Command Reference Manual page 1783

Examples
# Enable EAPOL-triggered 802.1X guest VLAN assignment delay on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x guest-vlan-delay eapol
Related commands
display dot1x
dot1x guest-vlan
dot1x retry
dot1x timer tx-period
dot1x handshake
Use dot1x handshake to enable the online user handshake feature.
Use undo dot1x handshake to disable the online user handshake feature.
Syntax
dot1x handshake
undo dot1x handshake
Default
The online user handshake feature is enabled.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
The online user handshake feature enables the device to periodically send EAP-Request/Identity
packets to the client for verifying the connectivity status of online 802.1X users. The device sets a
user to the offline state if it does not receive an EAP-Response/Identity packet from the user after
making the maximum attempts within the handshake timer. To set the handshake timer, use the
dot1x timer handshake-period command. To set the maximum handshake attempts, use the
dot1x retry command.
Examples
# Enable the online user handshake feature on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x handshake
Related commands
display dot1x
dot1x timer handshake-period
dot1x retry
15