H3C S6812 Series Command Reference Manual page 1921

Related commands
display local-user
display password-control
display user-group
password-control composition enable
password-control enable
Use password-control enable to enable the password control feature globally.
Use undo password-control enable to disable the password control feature globally.
Syntax
password-control enable
undo password-control enable
Default
In non-FIPS mode:
The password control feature is disabled globally.
In FIPS mode:
The password control feature is enabled globally and cannot be disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
A specific password control feature takes effect only after the global password control feature is
enabled.
After the global password control feature is enabled, you cannot display the password and super
password configurations for device management users by using the corresponding display
commands. The configuration for network access user passwords can be displayed. The first
password configured for device management users must contain a minimum of four different
characters.
Examples
# Enable the password control feature globally.
<Sysname> system-view
[Sysname] password-control enable
Related commands
display password-control
password-control { aging | composition | history | length } enable
password-control expired-user-login
Use password-control expired-user-login to set the maximum number of days and maximum
number of times that a user can log in after the password expires.
Use undo password-control expired-user-login to restore the defaults.
9