H3C S6812 Series Command Reference Manual page 1644

Syntax
accounting command hwtacacs-scheme hwtacacs-scheme-name
undo accounting command
Default
The default accounting method of the ISP domain is used for command line accounting.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
Usage guidelines
The command line accounting feature works with the accounting server to record valid commands
that have been successfully executed on the device.
•
When the command line authorization feature is disabled, the accounting server records all
valid commands that have been successfully executed.
•
When the command line authorization feature is enabled, the accounting server records only
authorized commands that have been successfully executed.
Command line accounting can use only a remote HWTACACS server.
Examples
# In ISP domain test, perform command line accounting based on HWTACACS scheme hwtac.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting command hwtacacs-scheme hwtac
Related commands
accounting default
command accounting (Fundamentals Command Reference)
hwtacacs scheme
accounting default
Use accounting default to specify the default accounting method for an ISP domain.
Use undo accounting default to restore the default.
Syntax
In non-FIPS mode:
accounting
radius-scheme-name ] [ local ] [ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] [ none ] }
undo accounting default
In FIPS mode:
default { hwtacacs-scheme hwtacacs-scheme-name
3
[ radius-scheme