H3C S6812 Series Command Reference Manual page 1889

Port security commands
display port-security
Use display port-security to display port security configuration, operation information, and
statistics for ports.
Syntax
display port-security [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If you do not
specify a port, this command displays port security information for all ports.
Examples
# Display port security information for all ports.
<Sysname> display port-security
Global port security parameters:
Port security
AutoLearn aging time
Disableport timeout
MAC move
Authorization fail
NAS-ID profile
Dot1x-failure trap
Dot1x-logon trap
Dot1x-logoff trap
Intrusion trap
Address-learned trap
Mac-auth-failure trap : Disabled
Mac-auth-logon trap
Mac-auth-logoff trap
OUI value list
Index : 1
Ten-GigabitEthernet1/0/1 is link-up
Port mode
NeedToKnow mode
Intrusion protection mode
Security MAC address attribute
Learning mode
Aging type
: Enabled
: 0 min
: 20 s
: Denied
: Online
: Not configured
: Disabled
: Disabled
: Enabled
: Disabled
: Enabled
: Enabled
: Disabled
:
Value : 123401
: userLogin
: Disabled
: NoAction
: Sticky
: Periodical
1