H3C S6812 Series Command Reference Manual page 1384

Hide thumbs Also See for S6812 Series:
Table of Contents

Advertisement

Field
(0.0.0.0, 224.1.1.1)
Attribute
Host slots (0 in total)
Host ports (1 in total)
(S, SUC)
display l2-multicast ip forwarding
Use display l2-multicast ip forwarding to display Layer 2 multicast IP forwarding entries.
Syntax
display l2-multicast ip forwarding [ group group-address | source source-address ] * [ vlan
vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group group-address: Specifies a multicast group by its IP address. If you do not specify a multicast
group, this command displays Layer 2 multicast IP forwarding entries for all multicast groups.
source source-address: Specifies a multicast source by its IP address. If you do not specify a
multicast source, this command displays Layer 2 multicast IP forwarding entries for all multicast
sources.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
this command displays Layer 2 multicast IP forwarding entries for all VLANs.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays Layer 2 multicast IP forwarding entries for the master device.
Description
(S, G) entry, where 0.0.0.0 in the S position means all multicast sources.
Entry attribute:
dynamic—The entry is created by a dynamic protocol.
static—The entry is created by a static protocol.
pim—The entry is created by PIM.
kernel—The entry is obtained from the kernel.
success—Processing has succeeded.
fail—Processing has failed.
Member IDs and total number of the member devices that have member
ports, except for the specified member device or the master device when no
member device is specified.
Member ports and total number of member ports.
Port attribute:
D—Dynamic port.
S—Static port.
P—PIM port.
K—Port obtained from the kernel.
R—Port learned from (*, *) entries.
W—Port learned from (*, G) entries.
SUC—Processing has succeeded.
F—Processing has failed.
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

S6813 seriesS5150-ei

Table of Contents