H3C S6812 Series Command Reference Manual page 1694

attribute 15 check-mode
Use attribute 15 check-mode to configure the Login-Service attribute check method for SSH, FTP,
and terminal users.
Use undo attribute 15 check-mode to restore the default.
Syntax
attribute 15 check-mode { loose | strict }
undo attribute 15 check-mode
Default
The strict check method applies for SSH, FTP, and terminal users.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
loose: Matches the standard Login-Service attribute value 0 for SSH, FTP, and terminal services.
strict: Matches Login-Service attribute values 50, 51, and 52 for SSH, FTP, and terminal services,
respectively.
Usage guidelines
Use the loose check method only when the server does not issue Login-Service attribute values 50,
51, and 52 for SSH, FTP, and terminal users.
Examples
# Configure the Login-Service attribute check method as loose for SSH, FTP, and terminal users in
RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] attribute 15 check-mode loose
Related commands
display radius scheme
attribute 25 car
Use attribute 25 car to configure the device to interpret the RADIUS class attribute (attribute 25) as
CAR parameters.
Use undo attribute 25 car to restore the default.
Syntax
attribute 25 car
undo attribute 25 car
Default
The RADIUS class attribute is not interpreted as CAR parameters.
Views
RADIUS scheme view
53