H3C S6812 Series Command Reference Manual page 1849

Use undo portal apply mac-trigger-server to restore the default.
Syntax
portal apply mac-trigger-server server-name
undo portal apply mac-trigger-server
Default
No MAC binding server is specified.
Views
Interface view
Predefined user roles
network-admin
Parameters
server-name: Specifies a MAC binding server by its name, a case-sensitive string of 1 to 32
characters.
Usage guidelines
Only direct portal authentication supports MAC-based quick portal authentication.
For MAC-based quick portal authentication to take effect, perform the following tasks:
•
Configure normal portal authentication.
•
Configure a MAC binding server.
•
Specify the MAC binding server on a portal enabled interface.
Examples
# Specify MAC binding server mts on VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] portal apply mac-trigger-server mts
Related commands
portal mac-trigger-server
portal apply web-server (interface view)
Use portal [ ipv6 ] apply web-server to specify a portal Web server. The device redirects the HTTP
requests sent by unauthenticated portal users to the portal Web server.
Use undo portal [ ipv6 ] apply web-server to restore the default.
Syntax
portal [ ipv6 ] apply web-server server-name [ fail-permit ]
undo portal [ ipv6 ] apply web-server
Default
No portal Web server is specified.
Views
Interface view
Predefined user roles
network-admin
35