H3C S6812 Series Command Reference Manual page 1676

Usage guidelines
This command takes effect only when local accounting is configured for the local user. The
command does not apply to FTP, SFTP, or SCP users, who do not support accounting.
Examples
# Set the maximum number of concurrent logins to 5 for users using the local user name abc.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-manage-abc] access-limit 5
Related commands
display local-user
authorization-attribute (local user view/user group view)
Use authorization-attribute to configure authorization attributes for a local user or user group. After
the local user or a local user in the user group passes authentication, the device assigns these
attributes to the user.
Use undo authorization-attribute to restore the default of an authorization attribute.
Syntax
authorization-attribute { acl acl-number | idle-cut minutes | ip-pool ipv4-pool-name | ipv6-pool
ipv6-pool-name | session-timeout minutes | user-profile profile-name | user-role role-name | vlan
vlan-id | work-directory directory-name } *
undo authorization-attribute { acl | idle-cut | ip-pool | ipv6-pool | session-timeout | user-profile
| user-role role-name | vlan | work-directory } *
Default
The working directory for FTP, SFTP, and SCP users is the root directory of the NAS. However, the
users do not have permission to access the root directory.
The local users created by a network-admin or level-15 user are assigned the network-operator user
role.
Views
Local user view
User group view
Predefined user roles
network-admin
Parameters
acl acl-number: Specifies an authorization ACL. The value range for the acl-number argument is
2000 to 5999. After passing authentication, a local user can access the network resources specified
by this ACL.
idle-cut minutes: Sets an idle timeout period in minutes. The value range for the minutes argument
is 1 to 120. When the idle cut feature is enabled, an online user whose idle period exceeds the
specified idle timeout period is logged out.
ip-pool ipv4-pool-name: Specifies an IPv4 address pool for the user. The ipv4-pool-name argument
is a case-insensitive string of 1 to 63 characters.
ipv6-pool ipv6-pool-name: Specifies an IPv6 address pool for the user. The ipv6-pool-name
argument is a case-insensitive string of 1 to 63 characters.
35