H3C S6812 Series Command Reference Manual page 1525

Table 3 Command output
Field
Interface
Inbound policy
Outbound policy
IPv4 ACL 2001
IPv4 ACL 2002 (Failed)
Hardware-count
Hardware-count (Failed)
From 2011-06-04 10:25:21 to
2011-06-04 10:35:57
2 packets
No resource
rule 5 permit source 1.1.1.1 0
(Failed)
Totally 2 packets permitted, 0
packets denied
Totally 100% permitted, 0%
denied
IPv4 default action
IPv6 default action
MAC default action
Totally 7 packets
Description
Interface to which the ACL applies.
ACL used for filtering incoming traffic.
ACL used for filtering outgoing traffic.
IPv4 basic ACL 2001 has been successfully applied.
The device has failed to apply IPv4 basic ACL 2002.
ACL rule match counting has been successfully enabled.
The device has failed to enable counting ACL rule matches.
Start time and end time of the statistics.
Two packets matched the rule.
This field is not displayed when no packets matched the rule.
Resources are not enough for counting matches for the rule. In packet
filtering statistics, this field is displayed for a rule when resources are
not sufficient for rule match counting.
The device has failed to apply rule 5.
Number of packets permitted and denied by the ACL.
Ratios of permitted and denied packets to all packets.
Packet filter default action for packets that do not match any IPv4
ACLs:
•
Deny—The default action deny has been successfully applied for
packet filtering.
•
Deny (Failed)—The device has failed to apply the default action
deny for packet filtering. The action permit still functions.
•
Permit—The default action permit has been successfully applied
for packet filtering.
Packet filter default action for packets that do not match any IPv6
ACLs:
•
Deny—The default action deny has been successfully applied for
packet filtering.
•
Deny (Failed)—The device has failed to apply the default action
deny for packet filtering. The action permit still functions.
•
Permit—The default action permit has been successfully applied
for packet filtering.
Packet filter default action for packets that do not match any Layer 2
ACLs:
•
Deny—The default action deny has been successfully applied for
packet filtering.
•
Deny (Failed)—The device has failed to apply the default action
deny for packet filtering. The action permit still functions.
•
Permit—The default action permit has been successfully applied
for packet filtering.
The default action has been executed on seven packets.
10