When Replacing The Mbu/Psubp - Oracle Fujitsu SPARC M12-1 Service Manual

please select 'cancel'.
[f:finish|c:cancel] : f
The following screen is displayed. Wait until the processing has completed.
Waiting for FAN#6 to enter install state.
[This operation may take up to 1 minute(s)]
(progress scale reported in seconds)
Diagnostic tests for FAN#6 have started.
[This operation may take up to 6 minute(s) 30 second(s)]
(progress scale reported in seconds)
Confirm that the status is normal ("Normal") after diagnosis, and then enter
2.
"f".
------------------------------------------------------------------------------
Maintenance/Replacement Menu
Status of the replaced FRU.
FRU
------------------- --------------
/FAN#6
------------------------------------------------------------------------------
The replacement of FAN#6 has completed normally.[f:finish] : f
3. When the maintenance menu appears, enter "c" to exit the operation.
------------------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a type of model which has FRU to be replaced.
1. FAN (Fan Unit)
2. PSU (Power Supply Unit)
------------------------------------------------------------------------------
Select [1,2|c:cancel] : c
6.3

When Replacing the MBU/PSUBP

This section describes the procedure for restoring the system after reinstalling the
MBU or PSUBP.
0.. done
0.... 30..... 60.....
Status
Normal
Chapter 6 Understanding the Preparations for Restoring the System
90. done
81