Safety Precautions When Rackmounting The Storage Server - Oracle X6-2 Installation Manual

Safety Precautions When Rackmounting the Storage Server

Safety Precautions When Rackmounting the Storage Server
This section describes safety precautions you must follow when installing the storage server
into a rack.
Caution -
and moving the rack to a new location, verify that the leveling feet are up before moving the
rack.
Caution -
beginning an installation.
Caution -
closed or multi-unit rack assembly, the operating ambient temperature of the rack environment
might be greater than room ambient temperature. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum ambient temperature
(Tma) specified for the storage server. For storage server environmental requirements, see
"Environmental Specifications" on page
Caution -
amount of airflow required for safe operation of the equipment is not compromised.
Caution -
hazardous condition is not created due to uneven mechanical loading.
Caution -
equipment to the supply circuit and the effect that overloading of the circuits might have on
over-current protection and supply wiring. Appropriate consideration of equipment nameplate
power ratings should be used when addressing this concern.
Caution -
maintained. Particular attention should be given to supply connections other than direct
connections to the branch circuit (for example, use of power strips).
Caution -
work space.
26 Oracle Exadata Storage Server X6-2 Extreme Flash Installation Guide • July 2018
Leveling feet position: When unpacking at the installation site, or when repackaging
Stabilize Rack: Deploy the anti-tilt bar or legs on the equipment rack before
Elevated operating ambient temperature: If the storage server is installed in a
Reduced airflow: Installation of the equipment in a rack should be such that the
Mechanical loading: Mounting of the equipment in the rack should be such that a
Circuit overloading: Consideration should be given to the connection of the
Reliable earthing: Reliable earthing of rackmounted equipment should be
Mounted Equipment: Slide-rail-mounted equipment is not to be used as a shelf or a
16.