system, you can normally check on the system console for messages regarding a disk
that is likely to fail or that has already failed. This information is also recorded in the
/var/adm/messages file.
In these error messages, a failed internal disk drive is normally indicated with a
physical device name or logical device name. In addition, depending on the
application, the slot number of the HDD/SSD may be reported.
The procedure to check information on HDD/SSD mounting locations varies
depending on the operating system.
For Oracle Solaris 11
■
For details, see
diskinfo command (Oracle Solaris
For Oracle Solaris 10
■
For details, see
Using the format command (Oracle Solaris 11)
Execute the format command to check the HDD/SSD slots.
1.
(1) to (4) in the following example represent:
(1): Logical path name of the disk
(2): The disk is mounted in the HDD#0 slot
(3): The disk is mounted in the HDD#1 slot
(4): The disk is mounted in the HDD#2 slot
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c2t50000393B81B3A36d0 <TOSHIBA-MBF2600RC-3706 cyl 46873 alt 2 hd 20
sec 625> <-- (1)
/pci@8100/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000393b81b3a36,0
/dev/chassis/SYS/HDD00/disk <-- (2)
1. c2t500000E01FB332A2d0 <FUJITSU-MBD2600RC-3701 cyl 46873 alt 2 hd 20
sec 625> <-- (1)
/pci@8100/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w500000e01fb332a2,0
/dev/chassis/SYS/HDD01/disk <-- (3)
2. c2t50000393B81B4D7Ad0 <TOSHIBA-MBF2600RC-3706 cyl 46873 alt 2 hd 20
sec 625> <-- (1)
/pci@8100/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000393b81b4d7a,0
/dev/chassis/SYS/HDD02/disk <-- (4)
Specify disk (enter its number):
Using the diskinfo command (Oracle Solaris 11)
1.
Execute the diskinfo command to check the HDD/SSD slots.
(1) to (3) in the following example represent:
(1): Device path name and logical path name of the disk mounted in HDD#0
(2): Device path name and logical path name of the disk mounted in HDD#1
"Using the format command (Oracle Solaris
11)."
"Using the diskinfo command (Oracle Solaris
Chapter 5 Preparations Required for Maintenance
11)" or
"Using the
10)."
53
Need help?
Do you have a question about the Fujitsu SPARC M12-1 and is the answer not in the manual?