Table of Contents
Advertisement
6.1.6
Installing the Power Cords
If the power cords were removed for maintenance, reinstall the power cords, and
then set the cable clamp to them.
Note - In the case of a dual power feed, connect the power cords in their original positions by
referring to the record that you made before the start of maintenance.
Install the power cord to the PSU.
1.
Insert the power cord all the way straight into the PSU.
Figure 6-9 Installing the Power Cords
78
Fujitsu SPARC M12-1 Service Manual • January 2023
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Fujitsu SPARC M12-1 and is the answer not in the manual?