Removing Memory - Oracle Fujitsu SPARC M12-1 Service Manual

16.5.2

Removing Memory

This section describes the procedure for removing memory. Use the same procedure
for reduction too.
When replacing the MBU, you need to remove memory from the old unit and
reinstall it on the new unit. Mount the memory at the same memory mounting
locations as those before replacement.
To reduce memory, see
Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
on Static
Move the latch of the memory slot outward, and then remove the memory by
1.
pulling it straight up.
Note - Record the mounting locations of the memory before removing them, to ensure that
they are reinstalled correctly.
Note - Place the removed memory on a grounded antistatic ESD mat.
186 Fujitsu SPARC M12-1 Service Manual • January 2023
"2.2 Checking the Memory Configuration
Electricity."
Rules."
"1.4 Precautions