Table of Contents
Advertisement
9.3
Removing an HDD/SSD
This section describes the procedure for removing an HDD/SSD. Use the same
procedure for reduction too.
In HDD/SSD expansion, to install an HDD/SSD in a slot, first remove the internal
storage filler unit from the slot.
Enable removal of the HDD/SSD before attempting to remove it. For details, see
"Chapter 7 Maintenance
Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
on Static
Push the latch (A in
1.
the lever.
Figure 9-2 HDD/SSD Latch
Flow."
Electricity."
Figure
A
9-2) of the HDD/SSD to release the lock and open
Chapter 9 Maintaining Internal Storage
"1.4 Precautions
133
Advertisement
Table of Contents
Troubleshooting
