Connect the three cables that connect the PSUBP to the MBU.
7.
Note - Connect the cables in their original positions by referring to the record that you made
before the start of maintenance.
Note - Make sure that each cable is firmly inserted.
Figure 13-9 MBU Cables
13.4.2
Restoring the Server
Install the air duct and the PSUBP cover.
1.
For details, see
2.
Install the upper cover.
For details, see
3.
Close the fan cover.
For details, see
Install all the PSUs.
4.
For details, see
The FRU installation work is completed. See
continue maintenance work.
170
Fujitsu SPARC M12-1 Service Manual • January 2023
"6.1.2 Installing the Air Duct and PSUBP
"6.1.3 Installing the Upper
"6.1.4 Closing the Fan
"11.4 Installing a
PSU."
Cover."
Cover."
Cover."
"Chapter 7 Maintenance
Flow" to