Oracle Fujitsu SPARC M12-1 Service Manual page 123

Table 7-10 System-Stopped/Hot Addition Work Procedure (HDD/SSD)
Item Work Procedure
1 Opening the rack door
2 Switching the mode switch on the
operation panel to Service mode
3 Checking the operating condition
of the system and the I/O device
usage status
4 Stopping the system
5 Adding an HDD/SSD
6 Performing a diagnosis test
7 Confirming that there is no
problem with the added FRU
8 Returning the mode switch on the
operation panel to Locked mode
9 Starting the system
10 Closing the rack door
Reference
"5.2 Switching the Mode Switch to Service
"5.3 Checking the Operating Condition and Resource Usage
"5.5 Stopping the Entire
"Chapter 9 Maintaining Internal
"6.4 Diagnosing a Replacement
"6.7 Checking the FRU Status After
"6.8 Returning the Mode Switch to Locked
"6.9 Starting the System"
Mode"
System"
Storage"
FRU"
Maintenance"
Mode"
Chapter 7 Maintenance Flow
Status"
109