Saving Setting Information And Configuration Information; Saving Xscf Setting Information; Saving Logical Domain Configuration Information And Openboot Prom Environment Variables - Oracle Fujitsu SPARC M12-1 Service Manual

XSCF> showdomainstatus -p 0
Logical Domain Name
primary
5.6 Saving Setting Information and
Configuration Information
5.6.1

Saving XSCF Setting Information

This section describes how to save the following XSCF setting information:
Network configuration information, advanced setting information, guest domain
■
configuration information, etc.
CPU Activation key, CPU Activation assignment, etc.
■
PPAR operation mode, time zone setting, user information, etc.
■
The following example shows the command for saving the XSCF setting information
on the USB device. For details, see "10.10 Saving/Restoring XSCF Settings
Information" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation
and Administration Guide.
XSCF> dumpconfig -v -V file:///media/usb_msd/backup-file.txt
5.6.2 Saving Logical Domain Configuration Information
and OpenBoot PROM Environment Variables
You can save the logical domain configuration information for each physical
partition in an XML file. To save the logical domain configuration information in an
XML file, log in to the control domain of the physical partition to perform the work.
This section shows the procedure for saving logical domain configuration information.
1. Switch to the control domain console of the target physical partition from the
XSCF shell.
Execute the ldm ls-spconfig command to confirm that the current logical
2.
domain configuration information has already been saved on the XSCF.
In the following example, the current configuration information is set in test1.
58 Fujitsu SPARC M12-1 Service Manual • January 2023
Status
Solaris powering down