Hdd/Ssd; Pcie Card - Oracle Fujitsu SPARC M12-1 Service Manual

B.4

HDD/SSD

The SPARC M12-1 supports the mounting of up to eight hard disk drives (HDDs) or
solid state drives (SSDs).
Table B-3
Table B-3 HDD/SSD Specifications
Item
Number of HDDs/SSDs
Interface
Location
Active/Hot maintenance
System-stopped (inactive)/Hot maintenance
System-stopped (inactive)/Cold maintenance
For the maintenance procedure, see
B.5

PCIe Card

The SPARC M12-1 supports the mounting of up to three low-profile PCIe cards.
Table B-4
Table B-4 PCIe Card Specifications
Item
Maximum number of PCIe cards
Location
Active/Hot maintenance
System-stopped (inactive)/Hot maintenance
System-stopped (inactive)/Cold maintenance
For the maintenance procedure, see
lists the specifications of the HDD/SSD.
lists the specifications of the PCIe card.
Description
8
SAS
Front of SPARC M12-1
Supported (Possible with any device other
than the boot device. With a redundant
configuration, however, this is also possible
with the boot device.)
Supported
Supported
"Chapter 9 Maintaining Internal
Description
3
Rear of SPARC M12-1
Unsupported
Unsupported
Supported
"Chapter 8 Maintaining the PCI Express
Appendix B Component Specifications
Storage."
Cards."
205