System-Stopped Addition - Oracle Fujitsu SPARC M12-1 Service Manual

Table 7-9 Active/Hot Addition Work Procedures (HDD/SSD)
Item Work Procedure
1 Opening the rack door
2 Checking the operating condition of
the system and the I/O device usage
status
3 Mounting the HDD/SSD
4 Incorporating the HDD/SSD by using
the hot plug function
5 Confirming that there is no problem
with the added FRU
6 Closing the rack door
7.3.2

System-Stopped Addition

This section describes the workflows for system-stopped/hot and system-stopped/
cold FRU addition. References to detailed descriptions are written in the workflow.
See any of them as required.
System-stopped addition on the SPARC M12-1 has the following patterns:
System-stopped/hot addition (HDD/SSD)
■
System-Stopped/Cold Addition (Memory)
■
System-stopped/cold addition
■
Reference
"5.3 Checking the Operating Condition and Resource Usage
"Chapter 9 Maintaining Internal
"6.6 Incorporating the HDD/SSD"
"6.7 Checking the FRU Status After
Storage"
Maintenance"
Chapter 7 Maintenance Flow
Status"
107