Checking The Usage Status Of The Hdd/Ssd; Enabling The Removal Of A Hdd/Ssd; How To Identify The Hdd/Ssd Slot - Oracle Fujitsu SPARC M12-1 Service Manual

# ldm list-io
For maintenance on a PCIe card, retain the output data of the ldm list-io
command, since you will need it later when restoring the original configuration
after maintenance.
5.3.3

Checking the Usage Status of the HDD/SSD

In the following execution example, the configurations and states of devices in pools
and errors generated from the devices are checked.
1. Log in to Oracle Solaris on the logical domain.
2. Execute the zpool status command to check the configurations and operating
conditions of devices.
# zpool status
pool: rpool
state: ONLINE
scan: none requested
config:
errors: No known data errors
pool: testpool
state: ONLINE
scan: none requested
config:
errors: No known data errors
5.4

Enabling the Removal of a HDD/SSD

This section describes the procedure for enabling the removal of a HDD/SSD by
using the hot plug function.
5.4.1

How to Identify the HDD/SSD Slot

To maintain an HDD/SSD, you need to know the physical device name or logical
device name of the drive to be installed or removed. If a disk error occurs in the
52 Fujitsu SPARC M12-1 Service Manual • January 2023
NAME
rpool
c1t50000393E802CC86d0
NAME
testpool
c1t500003930821CE9Ad0
c1t500003930820AB02d0
STATE READ WRITE CKSUM
ONLINE 0
ONLINE 0
STATE READ WRITE CKSUM
ONLINE 0
ONLINE 0
ONLINE 0
0 0
0 0
0 0
0 0
0 0