Oracle Fujitsu SPARC M12-1 Service Manual page 130

Figure 7-12 System-Stopped/Hot Removal Flow (HDD/SSD)
1. Opening the rack door
2. Switching the mode switch on the operation
panel to Service mode
3. Checking the operating condition of the
system and the I/O device usage status
4. Stopping the system
5. Removing an HDD/SSD
6. Performing a diagnosis test
7. Confirming that there is no problem with the
chassis after the removal
8. Returning the mode switch on the operation
panel to Locked mode
9. Starting the system
10. Closing the rack door
116 Fujitsu SPARC M12-1 Service Manual • January 2023
Removal complete