Chapter 3 Types Of Maintenance; Types Of Maintenance Supported By The Sparc M12-1 - Oracle Fujitsu SPARC M12-1 Service Manual

Chapter 3
Types of Maintenance
This section describes the types of maintenance performed on the SPARC M12-1.

Types of Maintenance Supported by the SPARC M12-1

■
Active Maintenance
■
System-Stopped Maintenance (Inactive Maintenance)
■
Note that the terms used in this manual are defined as follows.
Table 3-1 Definitions of Terms
Term
Physical partition
requiring maintenance
SPARC M12-1 requiring
maintenance
3.1 Types of Maintenance Supported by
the SPARC M12-1
The types of maintenance supported by the SPARC M12-1 depend on the system
operation status during maintenance. The supported maintenance is divided into two
types: active maintenance and system-stopped (inactive) maintenance.
Active maintenance
■
Type of maintenance performed while Oracle Solaris is operating
System-stopped maintenance (inactive maintenance)
■
Type of maintenance performed with the physical partition stopped
The SPARC M12-1 has only one physical partition. Thus, the state in which the
physical partition requiring maintenance is stopped is the same as the state in
Definition
Physical partition to which the SPARC M12-1 belongs that has
the Field Replaceable Unit (FRU) requiring maintenance
mounted in it
SPARC M12-1 that has the Field Replaceable Unit (FRU)
requiring maintenance mounted in it
27