Ping Command - Oracle Fujitsu SPARC M12-1 Service Manual

Table C-4 netstat Command Options (continued)
Option
-r
-n
The following example shows the output from the netstat command.
# netstat -p
Net to Media Table: IPv4
Device IP Address
------ -------------------- --------------- -------- ---------------
net0 4S-111-D0
net0 10.24.187.1
net0 224.0.0.22
Net to Media Table: IPv6
If Physical Address
----- -----------------
net0 33:33:00:00:00:01
net0 33:33:00:00:00:02
net0 33:33:00:01:00:02
net0 33:33:00:00:00:16
net0 b0:99:28:98:30:36
net0 33:33:ff:98:30:36
#
C.5

ping Command

The ping command sends the ICMP ECHO_REQUEST packet to network hosts.
In certain configurations of the ping command, the command output allows you to
identify a network link or a node that has experienced a problem. The destination
host is specified by the variable: hostname.
Table C-5
for troubleshooting.
216 Fujitsu SPARC M12-1 Service Manual • January 2023
Description
Displays the routing table.
Converts a host name into an IP
address and displays it.
Mask
255.255.255.255 SPLA
255.255.255.255
255.255.255.255 S
Type State
------- ------------ ---------------------------
other REACHABLE
other REACHABLE
other REACHABLE
other REACHABLE
local REACHABLE
other REACHABLE
lists the operands/options of the ping command and how they are useful
Application
Allows you to check the routing
information.
Allows you to check the IP address
instead of the host name.
Flags Phys Addr
b0:99:28:98:30:36
00:0a:b8:50:cd:42
01:00:5e:00:00:16
Destination/Mask
ff02::1
ff02::2
ff02::1:2
ff02::16
fe80::b299:28ff:fe98:3036
ff02::1:ff98:3036