Accessing A Fru; Removing The Power Cords - Oracle Fujitsu SPARC M12-1 Service Manual

maintenance work.
After replacing the FRU, perform the work in
System With the replacefru
5.8

Accessing a FRU

This section describes the operations to be performed before accessing the FRU
requiring maintenance. The required operations vary depending on the FRU
requiring maintenance.
5.8.1

Removing the Power Cords

Remove the cable clamp from each power cord, and then remove the power cords.
1. Release the tab of the cable clamp (A in
Pulling the cable clamp toward the rear facilitates the release of the latch.
Figure 5-1 Latch of the Cable Clamp
62 Fujitsu SPARC M12-1 Service Manual • January 2023
Command" to incorporate the FRU into the system.
A
"6.2 Incorporating a FRU Into the
Figure 5-1).