Oracle Fujitsu SPARC M12-1 Service Manual page 5

5.6.1 Saving XSCF Setting Information 58
5.6.2 Saving Logical Domain Configuration Information and
OpenBoot PROM Environment Variables 58
5.7 Releasing a FRU From the System With the replacefru Command 60
5.8 Accessing a FRU 62
5.8.1 Removing the Power Cords 62
5.8.2 Removing the Cables 63
5.8.3 Pulling the SPARC M12-1 Out From the Rack 64
5.8.4 Opening the Fan Cover 65
5.8.5 Removing the Upper Cover 67
5.8.6 Removing the Air Duct and PSUBP Cover 67
5.8.7 Releasing the Cable Guide Lock 69
Chapter 6 Understanding the Preparations for Restoring the System 71
6.1 Restoring the Server 71
6.1.1 Locking the Cable Guide 71
6.1.2 Installing the Air Duct and PSUBP Cover 72
6.1.3 Installing the Upper Cover 74
6.1.4 Closing the Fan Cover 75
6.1.5 Putting the SPARC M12-1 Into the Rack 76
6.1.6 Installing the Power Cords 78
6.2 Incorporating a FRU Into the System With the replacefru Command
80
6.3 When Replacing the MBU/PSUBP 81
6.3.1 Setting the Time 82
6.3.2 Confirming the Firmware Version 82
6.3.3 When the System is Configured With a Hardware RAID 83
6.4 Diagnosing a Replacement FRU 83
6.5 Restoring Setting Information and Configuration Information 85
6.5.1 Restoring XSCF Setting Information 85
6.5.2 Restoring Logical Domain Configuration Information and
OpenBoot PROM Environment Variables 85
Contents v