Step 4 (If Necessary): Cleaning With Oxidising Acid; Cleaning The Surface Of The Bp50 - kruss BP50 User Manual

Cleaning and maintenance
WARNING
Risk of injury due to shattering glass
If the glass should shatter, slivers of glass may cause injury.
Scarf the glass slowly and evenly. Do not allow it to glow red-hot.

Allow the glass to cool before rinsing with water.

Wear sound laboratory clothing and safety goggles.

4.1.4

Step 4 (if necessary): Cleaning with oxidising acid

Only in the case of contamination which has not been removed using the

previous measures: Clean the glass with a concentrated oxidising acid.
This work must only be carried out by persons who are familiar with the
dangers involved when handling acids and who are familiar with the
necessary safety procedures. Acquaint yourself with the properties of the
substances used. Pay attention to the appropriate R and S phrases (safety
advice).
SPA C SPA C SPAC SPAC
4.2

Cleaning the surface of the BP50

 Use soft cloths, which will not scratch the surface, for cleaning the BP50.
Clean the surface of the BP50 with pure water and a little rinsing agent if

necessary.
!
The surfaces of the BP50 can become dull due to contact with organic
solvents.
SPA C SPA C SPAC SPAC
page 15