Manual Versions; Symbols On Product Labels - Planmeca ProMax Technical Manual

Chapter A - GENERAL & TECHNICAL DATA

2 MANUAL VERSIONS

The installed software revision determines the available functions and behaviour of the unit. If
the unit is reporting error or help messages not listed in this manual, please refer to a newer
revision of the manual.

3 SYMBOLS ON PRODUCT LABELS

Type B applied part (Standard IEC 60601-1)
Alternating current (Standard IEC 60417)
Attention, consult accompanying documents (Standard IEC 60601-1)
X-ray source assembly: emitting (Standard IEC 60417)
Temple supports
Electrostatic sensitive device (Standard IEC 60417)
Separate collection for electrical and electronic equipment according to Directive 2002/96/EC
(WEEE)
A-2 Planmeca ProMax
MANUAL VERSIONS
Technical Manual