Chapter
E
NOTE If you use the Planmeca Device Tool software for calibrations, refer to the Planmeca
Device Tool manual, publication number 10031558, which should be used in
conjunction with this manual. Do not follow the Dimax4Tool instructions given in this
chapter.
1 REQUIRED TOOLS
•
Figure 1
•
Figure 2
Technical Manual
C-ARM AND IMAGING ARM
ProMax alignment tool (part number 10004225). For checking the position of the patient
positioning mechanism.
Sensor head alignment tool (Dimax4: part number 10029167, Dimax2/3: part number
10002699).For attaching the beam alignment tool.
ProMax alignment tool
Planmeca ProMax E-1
Need help?
Do you have a question about the ProMax and is the answer not in the manual?