Chapter E - C-ARM AND IMAGING ARM
•
Ball phantom (part number 10004011). For checking the position of the patient positioning
mechanism and the positioning lights.
Figure 3
•
Frankfort plane alignment tool (part number 50977). Used with the ball phantom for
checking the position of the Frankfort plane light.
Figure 4
•
Beam alignment tool (part number 50972). For checking the position of the panoramic X-
ray beam.
Figure 5
E-2 Planmeca ProMax
REQUIRED TOOLS
Technical Manual
Need help?
Do you have a question about the ProMax and is the answer not in the manual?