1 General and technical data
1.1 Introduction
1.1.1 Manual versions
1.1.2 Associated documentation
Technical manual
The Planmeca Viso X-ray unit uses Cone Beam Computed Tomography
(CBCT) to produce three-dimensional (3D) X-ray images. Panoramic,
cephalometric and projection radiography techniques can be used for two-
dimensional (2D) X-rays.
This manual describes how to maintain and service the Planmeca Viso X-ray
unit. These instructions include options that may not be available in all
countries.
Planmeca pursues a policy of continual product development. Although
every effort is made to produce up-to-date product documentation this
publication should not be regarded as an infallible guide to current
specifications. We reserve the right to make changes without prior notice.
NOTE
This manual is valid for Viso software version 1.1.0 or later.
NOTE
This software version is compatible with Planmeca Romexis software
version 5.1.1 or later. To check the software version of your X-ray unit, select
Settings > About > Component Information > SW version.
The installed software revision determines the available functions and
behaviour of the unit. If the unit is reporting error or help messages not listed
in this manual, please refer to a newer revision of the manual.
The X-ray unit is supplied with the following manuals:
•
User's manual
•
Installation manual
•
Installation quick guide
•
Technical manual
These manuals are intended to be used in conjunction with the
documentation for the Planmeca Romexis program. The Romexis package
contains the following manuals:
•
User's manual
•
Technical manual
NOTE
Outside of the information in these documents, Planmeca provides
additional instructions and descriptions to assist the service personnel in
parts repair.
Training
A hands-on user's training is given in connection with the X-ray unit
installation, adjusting, service and maintenance.
1 General and technical data
Planmeca Viso
1